Specification:

Working Voltage :6 cells, 7.2v NiCd, Nimh or 2 cells, 7.4v Li-po battery i 12v, ili 3s li-po

BEC Current :5v/1A

Continuous Output Current :200A forward, 100A backward

Compatible Motor :

13 Turn

Reversion :Yes

No Siginal, Cut Electricity Protection :Yes

Dimension :33.5 x 33.4 x 19.1mm

Net Weight :~39g

Gross Weight :~64g

1) Plug the 3 pin plug into your receiver. Make sure the wires are in the correct order for your brand

receiver.

2) Plug the bullet connectors onto your motor (red wire to positive).

3) Make sure the ESC switch is set to off.

4) Plug the battery into the Tamiya plug.

5) Make sure the throttle trim on your radio is set to zero and midpoint is at 50%, and then turn it on.

6) Turn on the ESC.

7) Wait while the motor revs 3 times.

8) Push forward on your radio. The car should move forward.

9) If the car moves backward, turn everything off, reverse the throttle trim on the radio, try again.

10) Specification: