FEATURES:

Safe and stable 

The S1000’s V type mixer design provides large amounts of propulsion while improving power efficiency. 

Combined with a DJI flight controllers like the A2, it is guaranteed to remain stable even with the loss of a rotor. 

Integrated into the center frame  is a power distribution system  using our patented coaxial cable connector 

 

Professional Octocopter

Weighing approximately 4kg with a maximum takeoff weight of about 10kg, the S1000 can easily carry 

equipment as heavy as a 5D mark 3. Used with a 6S 15000mAh battery it can fly for up to 15 minutes.
 

Gimbal and battery are mounted to the same bracket, with dampers placed between the bracket and the 

frame. This significantly reduces high-frequency vibrations and makes shots clearer and sharper. The battery 

tray's position also makes it more stable and convenient for mounting and dismounting. 

Supports all Zenmuse Z15 gimbal systems. Optimized for A2

 

Optimized for A2 wiring and installation, connecting an A2 flight controller and setting flight parameters is easy. The A2's antenna is kept away from any carbon fiber or metal, ensuring a better signal. 

Portable and easy to use

All eight arms can be completely folded down and the 1552 folding propeller can be tucked away, minimizing the S1000’s size for transportation. 

To fly, simply lift the frame arms up, lock them in place with the red clips and power up the system. This greatly saves on pre-flight prep time.

 

Each frame arm has a built-in 40A electronic speed controller (ESC). When combined with its 4114 pro motor and high performance 1552 folding propellers, it is capable of a maximum thrust of 2.5Kg

PARAMETER:
Specifications:
Frame
Diagonal Wheelbase: 1045 mm 
Frame Arm Length: 386 mm 
Frame Arm Weight (with Motor, ESC, Propeller): 325 g 
Center Frame Diameter: 332 mm 
Center Frame Weight (with Landing Gear Mounting Base, Servos): 1330 g
Landing Gear Size: 460mm(Length)×511mm(Width)×350mm(Height) (Top width: 155 mm)